| - ACTUATOR ●
- Type:Spring type pneumatic diaphragm actuator
- Diaphragm Material:Neoprene with fabric reinforced
- Input Signal:Pneumatic: 0.2~1.0 kg/cm² / 3~15 psi; Electric: DC 4~20mA
- Valve Action:Air-to-close (Direct action) / Air-to-open (Reverse action)
- BODY ●
- Type:Single seated straight-through globe valve, non-reversible
- Body Material:Cast Iron, Cast Steel, SS304, and SS316 available
- Connection Size: ½" to 8"; and size up to 12" by special order
- End Connection:Flanged end FF, RF, and RTJ available
- Flange Rating:
JIS: 10, 20 kg/cm²; and option available
ANSI: 150, 300LB; and option available
DIN: by special order - Bonnet Type:Standard type; Radiator finned bonnet (200°C or over);
Extended bonnet (under 0°C); Bellows seal bonnet (-30~+350°C, less than 10 kg/cm²)
- TRIM ●
- Valve Plug:Equal perectage contoured or V-port;
Linear contoured; ON-OFF plug (quick open) - Trim Material:SS304, SS316 or with Stellite coating available
- Soft-Seat:Tight shut off, ANSI Class IV
- ACCESSORIES ●
- Pneumatic P/P positioner w/air set
- Electric I/P positioner w/air set
- Solenoid valve
|
